We continuously want to renovate something in the house. But it is not always possible to make a significant renovation, and in those cases, the first alternative that comes to mind is house painting. The ink turns any space and is an excellent alternative if you want to renovate the environment. Because it is so common, house or apartment painting often seems to be an easy task to do, and with this, many people venture into the picture at home without the help of a professional.
However, even being simple, it is necessary that some care is taken to avoid errors that can generate losses and expenses for your pocket.
Therefore, our team presents in this article some common mistakes in painting home, so you avoid them and renew the environment the right way.
Mistakes you should not make in house painting
Do not check wall conditions. Do not check wall conditions. This is one of the most common mistakes: do not do the correct preparation before painting the walls. Do not just apply the paint and let it dry. To get the expected result on home painting, it is essential that you pay attention to some conditions before putting your hand in the dough. The house paint is a cosmetic change and does not solve structural problems. So, first of all, evaluate the conditions of your wall, because if it is damaged, you will hardly see a positive result in the painting. The fence should be:
- Without spots or cracks;
- Without infiltrations;
- Free of dust or cobwebs;
- Without moisture or mold.
It is worth remembering that we must always protect correctly what will not be painted, after all, the paint on the walls, can cause splatters on both the furniture and the floor and even the locks. Therefore, cover all the furniture with adhesive tapes, newspapers, sheets, or plastic, so as not to have surprises at the end of the painting.
Missing amount of ink
For those who do not have experience in painting house, it is common to end up buying the wrong amount of paint. Often the ink runs out during the painting process, and in that case, the situation can be even worse if you are using a color prepared especially for that environment. But, in general, people buy a quantity far beyond what is necessary and end up only realizing the error at the end of the work. To avoid one of these situations, it is essential to measure the areas that will be painted and compare how many square meters an ink can yield; usually, this information is present in the can itself. Thus, it is possible to make the correct calculation of how much material will be spent.
Make the painting on a rainy day
Another quite common mistake is to perform house painting on rainy days. Painting the house on a rainy day is not a good idea, as the paint takes a lot longer to dry. Harm to the drying of the color means to compromise the whole painting process, after all, to have a good result, it is necessary that the drying conditions are favorable. If you are planning to paint your house on sunny days and at times with plenty of natural light, avoiding possible stains.
Sink the paintbrush in the ink
Placing the entire brush inside the can is a fact that contributes to the waste of material in the painting process. If you want to optimize house paints, do not make that mistake. In addition to debris, you can deposit excess paint on the wall and compromise other stages of the painting process. The correct thing is just to wet the paintbrush in the paint, remove the excess and then pass on the wall.
One of the great mistakes that hinder the drying of paint is to make several layers without drying them properly. In house painting, it takes patience to get the best result possible. Therefore, make one layer of paint and only leave for the next when the former is completely dry. A great way to speed up this drying is to always keep windows and doors open, mainly because of the smell of paint.
Forget the ceiling
Not always the roof receives the attention deserved at the time of painting house. It is often painted with the amount of paint left over and last, but it is recommended that paint starts from the ceiling. For, if the ceiling paint splashes on the wall, it is easier to fix if it has not yet been painted.
Erase color and ink finish
Before starting to paint the house, it is essential to know the type of finish and paint ideal for that environment. For example, matte paints are suitable for walls with small surface defects, because they disguise imperfections, unlike satin or semi-gloss finish paints, which are more ideal for smoother walls and more durable and easy to clean. It is also essential to know the specific type of ink for each environment. Kitchens and bathrooms require so-called epoxy paint that is specific to humid climates.
Another critical factor, but that is conditioned to the personal taste, is the color. Often we are afraid to dare in colors or color the walls too much. Therefore, before beginning the painting of home, carefully observe all the tonalities of the chosen color palette, take into account the size of the rooms, and choose different shades for each one of them. It is critical not to use the same color in all rooms, especially if it is a firm tone. Tones like this tend to saturate the environment, so try to match the colors of the house with each other to give the feeling of unity in the background. Finding balance is vital when coloring the walls.…